Stirrer Accessories
Pipette Supplies, Inc. Rainin Pipet-Lite / Pipet-Lite XLS Shaft Coupling Nut, Single Channel Pipettes, 2µL-1000µL
Shaft coupling nut for the following pipettes:Pipet-Lite, Single Channel, L, SL, 2μL – 1000µLPipet-Lite XLS, Single Channel, XLS, 2μL – 1000µL
Microsolv Technology Corporation Paddles for sealing Film or Mats in the U-2D Micro-Sample Management System. 5/PK.
Complete application of Sealing Films or Mats by pressing down on the Film or Mats with this Paddle. Assure that a secure uniform seal around all wells and inserts are complete by a gentle burnishing action. Use with the U-2D Brand Micro-Sample Management System or with other 96 Well Plates. The paddles fit within the rim of raised-well plates.
Cole-Parmer IKA 1295900 Propeller Stirrer, 3-Bladed, 8 mm Bore
A variety of propellers, paddles, clamps, and stands are available.
Bellco Glass, Inc. Over Head Drive Adj Paddle, 8-36L
Over head drive adjustable paddle 8-36l MADE IN THE USA.
Bellco Glass, Inc. Stainless Steel Shaft Assembly ,250mL
Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless. MADE IN THE USASteel and polypropylene compression fitting. Size: 250ml
Bellco Glass, Inc. IOB w/ Water Jacketed Flask,250mL
Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. MADE IN THE USA.
Bellco Glass, Inc. Glass Ball Impeller Only,500mL
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 500mLScrew Cap: Blue PP, 100mm OD x 22.4mm TCap Seal: Teflon, 95.3mm OD x 10.4mm TSealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm TFlex Tube: Soft silicone, 57.2mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 110mm OAL, 28mm OD ball, houses one cast alnico magnet
Ace Glass, Inc. Stir blade, stainless, 23x113mm, 10mm shaft
23X113mm 304 SS stir blades for 10mm O.D. button type stir shafts. For compatible stir shafts see ACE 8068, 8070, 8074, and 8075 series.
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 2L-12L Flasks, 538mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 2L-12L Flasks, 538mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 5L-20L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 5L-22L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences 19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size
19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
WELCH MATERIALS INC Welchrom Syringe Filter, MCE, 13mm, 0.45μm, Prefilter, Double layers,100pcs/pk,10pk/cs.
Syringe Filter, MCE, 13mm, 0.45μm, Prefilter, Double layers,100pcs/pk,10pk/cs.